ServicesWhole-Home Rewiring
Whole-Home Rewiring in Hudson Oaks
When the wiring behind your walls has reached the end of its working life, we replace it in a planned order, circuit by circuit, so most of your home keeps running through the job. We test first, keep sections that are still sound, and tell you plainly what has to go.
Rewiring When Repairs No Longer Hold
Most wiring problems are local. A loose connection, one worn outlet or a single overloaded circuit is a job for our electrical repair visit, not a rewire. Rewiring becomes the right call when the trouble is spread through the house: insulation that crumbles when it is touched, no ground path on most circuits, or old splices hidden in walls and attics.
Our approach is to treat the wiring like any other long-lived part of your home. We find out what condition it is actually in, keep the runs that test well, and replace the sections that are failing. Sometimes that means the whole house. Often it means the bedrooms and kitchen while the newer addition stays as it is.
You get a written scope before any work starts, so you know which rooms are affected, what stays and what the finished system will look like.
What the Rewire Includes
- Circuit testing and a map
- Each circuit gets an insulation and ground test, and we record which lights and outlets it serves. That record guides the job and is yours to keep when we finish.
- Grounded cable in place of failing runs
- Worn-out runs come out and modern grounded cable goes in, pulled through attics, crawlspaces and existing wall cavities wherever we can get to them.
- New devices and boxes
- We remove old outlets, switches and undersized boxes and set new ones level and flush, with cover plates that match from room to room.
- Code-required GFCI and AFCI
- Kitchens, baths, laundry areas, outdoor outlets and other spots named in current code get GFCI and AFCI protection.
- Landing circuits and labeling the panel
- Each new circuit is connected at the panel and its breaker clearly marked. If the panel is too small or worn, we explain what we see and can add a panel upgrade to the job.
- Permit and inspection handled
- We file the permit, book the inspections the local jurisdiction requires and meet the inspector on site when the work is reviewed.
Signs Your Wiring May Need Replacing
Brittle or cloth-covered insulation
Insulation that cracks or flakes when a fixture is changed no longer protects the copper inside. Years of North Texas attic heat speed that drying along ceiling runs.
Mostly two-prong outlets
Ungrounded outlets throughout the house usually mean the circuits behind them have no ground path at all, which matters for modern electronics and appliances.
Warm plates or scorch marks
A switch plate that feels warm or an outlet with brown marks points to a failing connection. One is a repair. Several across different rooms suggest a wider problem.
Repeated trips and flickering
When breakers trip and lights flicker on circuits that are not overloaded, the wiring itself may be breaking down.
An inspection report flags it
Home inspectors and insurers often note outdated or aluminum branch wiring. We can test what they found and give you a clear answer on what it needs.
What Drives Rewiring Prices
Every house hides its wiring differently, so every rewire is priced on its own. The real numbers come out of the walkthrough, and these are the things that change them.
House size and number of circuits
Additional rooms and circuits add cable, devices and labor.
Getting to the wiring
Open attics and crawlspaces keep runs easy. Slabs, vaulted ceilings and finished basements need more time and more careful openings.
How much wiring stays
Runs that pass testing remain in place and shorten the job, so a partial rewire can come in well below a full one.
Panel work and permits
A panel that must be replaced to handle the new circuits becomes part of the scope, together with the permit and inspection steps.
Patching and device finishes
Openings stay small, though most jobs need a little drywall patching. The style and finish of the devices you pick also affect the total.
How the Work Runs
- 1
Walkthrough and testing
We visit, open a sample of boxes, test the circuits and look at the panel, attic and crawlspace. You see what we see, with photos.
- 2
Written scope
You get a plan listing which circuits are replaced, which are kept and the order of the rooms. Nothing starts until you approve it.
- 3
Prep and protection
Floors and furniture near the work are covered. We tell you each day which rooms will be without power and for roughly how long.
- 4
Rewiring in stages
We work one area at a time and restore power at the end of each day wherever we can, so the kitchen and at least one bathroom stay usable.
- 5
Inspection and handover
After the inspection passes, we walk you through the panel labels and circuit map and clean up before we leave.
Common Rewiring Questions
Will we have to leave the house during the rewire?
Most families stay put. We go section by section and turn the power back on each evening whenever we can. If a big house with tight access would go easier with a day or two away, we will say so at the walkthrough.
How much time does a full rewire take?
That depends on the home's size and how easy the wiring is to get to. Rewiring a few rooms can go quickly, and a whole house takes more time. The written scope includes a schedule so you can plan.
Is a partial rewire an option?
Yes, and it is often the smarter one. When newer sections of the house test well, they stay, and we replace only the circuits that are failing.
How much wall damage should we expect?
We use attics, crawlspaces and open cavities before anything else, and cut into walls only when there is no other route. Any opening is small and clean, so patching is quick.
Do you take care of the permit?
Yes. We file it and schedule the inspections the local jurisdiction requires, and nothing gets closed up until the work has been checked.
Are rewiring and a panel upgrade the same job?
No. A panel upgrade swaps the box your circuits start from, while rewiring replaces the cable that runs out to your lights and outlets. A home may need either one or both, and testing shows which.
Find Out How Much Life Your Wiring Has Left
A service visit gives you test results, photos and a clear answer on what can stay and what should be replaced. We serve Hudson Oaks and nearby towns including Weatherford, Willow Park and Aledo.